Effect of cork powder concentration and service temperature on strength characteristics and failure modes of tubular adhesively bonded joints
June 01, 2024
Shamsheer Haider, Hassan Ejaz, Aamir Mubashar, Manzar Masud,
Theoretical and Applied Fracture Mechanics - Volume 131, Article Number: 104377
Effect of hybridization on the mechanical performance and cost efficiency of carbon/flax bio-hybrid composites
April 09, 2024
Manzar Masud, Aamir Mubashar,
Polymer Composites - Pages: 19
Effect of Fibre Hybridization and Stacking Sequence on the Low Velocity Impact Response of Flax/Basalt/Aluminum Composite-Metal Joints
March 01, 2024
Muhammad Umar Bin Ashraf, Aamir Mubashar, Manzar Masud, Hassan Ejaz, Syed Hameed Hussain, Muhammad Subhan Dilawar,
Composite Structures - Volume 331, Article Number 117925
The mechanical behavior of modified epoxy adhesive using GNPs, MWCNTs, and RGO nanomaterials
October 21, 2023
Hassan Ejaz, Aamir Mubashar, Ahsan Tanveer, Emad Ud Din, Zaib Ali, Nabeel Arif,
Journal of Adhesion Science and Technology - Pages 1-21
Structural optimization of orthopedic hip implant using parametric and non-parametric optimization techniques
August 16, 2023
Muhammad Abdullah, Aamir Mubashar, Emad Uddin,
Biomedical Physics and Engineering Express - Volume 9, Issue 5, Article Number 055026
Effect of cork powder concentration and service temperature on strength characteristics and failure modes of adhesively bonded lap joints
August 01, 2023
Hassan Ejaz, Yousaira Muqbool, Zar Afshan, Aamir Mubashar,
Theoretical and Applied Fracture Mechanics - Volume 126, Article Number 103955
An experimental and simulation study of RGO effects on mechanical behaviour of structural adhesive and lap shear joints strength
August 01, 2023
Hassan Ejaz, Aamir Mubashar, Emad Ud Din, Zaib Ali, Nabeel Arif, Saad Waqar,
International Journal of Adhesion and Adhesives - Volume 126, Article Number 103480
Impact of solid and hollow bluff bodies on the performance and dynamics of flag-based energy harvester
February 01, 2023
Usman Latif, M Yamin Younis, Emad Uddin, Zaib Ali, Aamir Mubashar, A. Abdelkefi,
Sustainable Energy Technologies and Assessments - Volume 55, Article Number 102882
Experimental investigation of effect of welding parameters on surface roughness, micro-hardness and tensile strength of AISI 316L stainless steel welded joints using 308L filler material by TIG welding
December 01, 2022
Khubaib Zafar Ghumman, Sadaqat Ali, Emad Ud Din, Aamir Mubashar, Niaz Bahadur Khan, Syed Waqar Ahmed,
Journal of Materials Research and Technology - Volume 21, Pages 220-236
Effect of Temperature and Al2O3 NanoFiller on the Stress Field of CFRP/Al Adhesively Bonded Single-Lap Joints
November 30, 2022
Muhammad Hassan, Aamir Mubashar, Manzar Masud, Amad Zafar, Muhammad Umair Ali, You Seung Rim,
Coatings - Volume 12(12), Article Number 1865
A comparative study of GNPs and MWCNTs additives on dispersion behavior and strength characteristics of the adhesively bonded joints
November 14, 2022
Hassan Ejaz, Aamir Mubashar, Emad Ud Din, Zaib Ali,
Journal of Dispersion Science and Technology - Pages 1-12
Effect of functionalised and non-functionalised GNPs addition on strength properties of high viscous epoxy adhesive and lap shear joints
September 01, 2022
Hassan Ejaz, Aamir Mubashar, Emad Ud Din, Zaib Ali, Nabeel Arif,
Polymer Testing - Volume 113, Article Number 107680
Influence of MWCNTs on strength properties of high viscous epoxy adhesive and fracture behavior of adhesively bonded joints
August 01, 2022
Hassan Ejaz, Aamir Mubashar, Emad Ud Din, Zaib Ali, Nabeel Arif,
Theoretical and Applied Fracture Mechanics - Volume 120, Article Number 103412
Investigating relative density effects on quasi-static response of high-density Rigid Polyurethane Foam (RPUF)
June 01, 2022
Naveed Iqbal, Aamir Mubashar, Sohail Ahmed, Nabeel Arif, Emad Uddin,
Materials Today Communications - Volume 31, Article Number 103320
Prediction of the Ultimate Strength of Notched and Unnotched IM7/977-3 Laminated Composites Using a Micromechanics Approach
October 11, 2021
Manzar Masud, Moosa S. M. Al Kharusi, Muhammad Umair Ali, Aamir Mubashar, Shaik Javeed Hussain , Adnan Tariq, Gulfam Ul Rehman, Mahmood Hassan Akhtar, Shama Javeed ,
Polymers - Volume 13(20), Article Number 3491
An Investigation of the Experimental and Numerical Ballistic Response of 12.7mm AP tracer Projectile Against Al2O3/Al 5083-H116 Bi-layer Armour
April 19, 2021
Haseeb Ahmed, Aamir Mubashar, Emad Uddin, Syed Waheed Ul Haq,
International Journal of Multiphysics - Volume 15(2), Pages 119-138
Numerical investigation of hydrodynamic and hydro-acoustic performance of underwater propeller operating in off-design flow conditions
December 30, 2020
Muhammad Rehan Naseer, Emad Uddin, Aamir Mubashar, Muhammad Sajid, Zaib Ali, Khalid Akhtar,
Journal of Marine Engineering and Technology - Pages 1-10
Experimental investigation of impact of
long rod eroding projectiles against rolled
homogeneous armour
October 01, 2020
Sana Zaki, Emad Uddin, Aamir Mubashar,
Proceedings of The Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications - Volume 234, Issue 10, Pages 1335-1342
Design and verification of enhanced CFRTPCs fabrication technique using fused deposition modeling
July 29, 2020
Ali Bin Naveed, Shahid Ikramullah Butt, Aamir Mubashir, Fausz Naeem Chaudhry, Najam ul Qadir, Zhang Faping,
Journal of Thermoplastic Composite Materials - Pages 1-23
Numerical investigation of surface acoustic wave (SAW) interacting with a droplet for point-of-care devices
December 01, 2019
Imran Shah, Emad Uddin, Aamir Mubashar, Muhammad Sajid, Muhammad Yamin Younis, Hudair Samad, Kyung Hyun Choi,
International Journal of Acoustics and Vibrations - Volume: 24, Issue: 4, Pages 632-637
Multi-objective optimization for sustainable turning Ti6Al4V alloy using grey relational analysis (GRA) based on analytic hierarchy process (AHP)
November 01, 2019
Muhammad Younas, Syed Husain Imran Jaffery, Mushtaq Khan, Muhammad Ali Khan, Riaz Ahmad, Aamir Mubashar, Liaqat Ali,
International Journal of Advanced Manufacturing Technology - Volume 105, Issue 1-4, Pages 1175-1188
Ballistic response of 12.7 mm armour piercing projectile against perforated armour developed from structural steel
October 01, 2019
Aamir Mubashar, Emad Uddin, Saqib Anwar, Nabeel Arif, Syed Waheed Ul Haq, MAK Chowdhury,
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications - Volume 233, Issue 10, Pages 1993-2005
Computational Modeling of the Balloon Expandable Stent Deployment in Coronary Artery Using Finite Element Method?
September 06, 2019
Muhammad Umer, Murtaza Najabat Ali, Aamir Mubashar, Mariam Mir,
Research Reports in Clinical Cardiology - Volume 2019:10 Pages 43—56, Published 6 September 2019
Numerical and experimental investigation of Johnson?Cook material models for aluminum (Al 6061-T6) alloy using orthogonal machining approach
September 01, 2018
Sohail Akram, Syed Hussain Imran Jaffery, Mushtaq Khan, Muhammad Fahad, Aamir Mubashar, Liaqat Ali ,
Advances in Mechanical Engineering - Volume 10(9), Pages 1–14
Topology optimisation of adhesive joints using non-parametric methods
March 01, 2018
H. Ejaz, A. Mubashar , I. A. Ashcroft, Emad Uddin, Mushtaq Khan,
International Journal Of Adhesion And Adhesives - NULL
An experimental and numerical investigation of the ballistic response of multi-level armour against armour piercing projectiles
December 01, 2017
M. Wasif Ali, Aamir Mubashar, Emad Uddin, Syed Waheed ul Haq, M. Khan,
International Journal of Impact Engineering - NULL
Comparison of cohesive zone elements and smoothed particle hydrodynamics for failure prediction of single lap adhesive joints
May 12, 2017
Aamir Mubashar , I. A. Ashcroft,
Journal of Adhesion - Volume 93, Issue 6, Pages 444-460
A numerical study of the effect of ply-layup on the strength and stiffness of a composite T-joint under three point bending
January 17, 2017
Ammar Azam, Aamir Mubashar, Ian Anthony Ashcroft, Emad Uddin, Syed Husain Imran Jaffery,
Journal of Adhesion Science and Technology - NULL
Analysis of weld characteristics of micro-plasma arc welding and tungsten inert gas welding of thin stainless steel (304L) sheet
December 30, 2016
Sadaf Batool, Mushtaq Khan, Syed Husain Imran Jaffery, Ashfaq Khan, Aamir Mubashar, Liaqat Ali, Nawar Khan, Muhammad Nabeel Anwar,
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications - Volume 230, Issue 6, Pages, 1005-1017
Use of wear map approach in optimization of drilling parameters for petroleum exploration
June 30, 2015
Syed Husain Imran Jaffery, Shahid Sadiq, Mushtaq Khan, Liaqat Ali, Muhammad Nabeel Anwar, Aamir Mubashar,
International Journal of Mechanical and Production Engineering - Volume 3, Issue 6, Pages 63-65
Effect of Cu addition on microstructure and transformation temperatures of Ti25Ni25Pd25 high temperature shape memory alloys
June 01, 2015
Saifur Rehman, Mushtaq Khan, Liaqat Ali, Syed Husain Imran Jaffery, Aamir Mubashar,
International Journal of Mechanical and Production Engineering - Volume 3, Issue 6, Pages 96-100
Improvement in the Mechanical Properties of High Temperature Shape Memory Alloy (Ti50Ni25Pd25) by Copper Addition
March 09, 2015
Saif-ur-Rehman, Mushtaq Khan, A. Nusair Khan, Syed Husain Imran Jaffery, Liaqat Ali , Aamir Mubashar,
Advances in Materials Science and Engineering - Volume 2015, Article ID 434923, 7 pages
A Numerical Investigation of Effects of Cutting Velocity and Feed Rate on Residual Stresses in Aluminum Alloy Al-6061
February 01, 2015
Sohail Akram, Syed Husain Imran Jaffery, Mushtaq Khan, Aamir Mubashar, Liaqat Ali,
International Journal of Materials, Mechanics and Manufacturing - Volume 3, No. 1, Pages 26-30