ExoMechHand prototype development and testing with EMG signals for hand rehabilitation
February 01, 2024
Ajdarullah, Muhammad Asim Waris, Uzma Shafique, Niaz Bahadur Khan, Quratlain Saeed, Naureen Tassadaq, Owais Qasim, Hafiz T Ali,
Medical Engineering and Physics - Volume 124, Article Number 104095
Robust CNN architecture for classification of reach and grasp actions from neural correlates: an edge device perspective
December 11, 2023
Hajra Sultan, Haris Ijaz, Muhammad Asim Waris, Shafaq Mushtaq, Khurram Mushtaq, Niaz Bahadur Khan, Said Ghani Khan, Mehdi Talija, Jamshed Iqbal,
Measurement Science and Technology - Volume 35, Number 3, Article Number 035703
Deploying efficient net batch normalizations (BNs) for grading diabetic retinopathy severity levels from fundus images
September 02, 2023
Summiya Batool, Syed Omer Gilani, Asim Waris, Khawaja Fahad Iqbal, Niaz Bahadur Khan, Muhammad Ijaz Khan, Syed Muhammad Eldin, Fuad A. Awwad,
Scientific Reports - Volume 13, Issue 1, Article Number 14462
Effect of Zn nanoparticle-doped flux on mechanical properties of SAC305 solder joint after electromigration
January 31, 2023
Muhammad Nasir Bashir, Niaz Bahadur Khan, Shahid Bashir, Abdul Faheem Khan, M. M. Quazi, Mustabshirha Gul, Saif Wakeel, Hafiz Muhammad Saad,
Journal of Materials Science: Materials in Electronics - Vol:34, Article Number: 321,
Experimental investigation of effect of welding parameters on surface roughness, micro-hardness and tensile strength of AISI 316L stainless steel welded joints using 308L filler material by TIG welding
December 01, 2022
Khubaib Zafar Ghumman, Sadaqat Ali, Emad Ud Din, Aamir Mubashar, Niaz Bahadur Khan, Syed Waqar Ahmed,
Journal of Materials Research and Technology - Volume 21, Pages 220-236
Role of Crystallographic Orientation of β-Sn Grain on Electromigration Failures in Lead-Free Solder Joint: An Overview
November 15, 2022
Muhammad Nasir, Sajid Ullah Butt, Muhammad Adil Mansoor, Niaz Bahadur Khan, Shahid Bashir, Yew Hoong Wong, Turki Alamro, Sayed Mohamed Eldin, Mohammed Jameel,
Coatings - Volume 12(11), Article Number 1752
The Impact of Laminations on the Mechanical Strength of Carbon-Fiber Composites for Prosthetic Foot Fabrication
October 10, 2022
Bakhtawar Sehar, Muhammad Asim Waris, Syed Omer Gilani, Umar Ansari, Shafaq Mushtaq, Niaz Bahadur Khan, Mohammed Jameel, M. Ijaz Khan, Omar T. Bafakeeh, El Sayed Mohamed Tag-ElDin,
Crystals - Volume 12, Issue 10, Article Number 1429
A Training Exoskeleton for rehabilitation in Upper Extremity for Stroke Patients. Journal of Computational Biophysics and Chemistry
September 21, 2022
Sohaib Faiz, Muhammad Asim Waris, Shafaq Mushtaq, Niaz Bahadur Khan, Mohammed Jameel, Ahmed M. Galal,
Journal of Computational Biophysics and Chemistry - Pages 1-9
Cattaneo–Christov Double Diffusion (CCDD) on Sutterby Nanofluid with Irreversibility Analysis and Motile Microbes Due to a RIGA Plate
September 09, 2022
Muhammad Faizan Ahmed , A Zaib, Farhan Ali, Omar T Bafakeeh , Niaz Bahadur Khan, El Sayed Mohamed Tag-ElDin, Mowffaq Oreijah , Kamel Guedri, Ahmed M. Galal,
Micromachines - Volume 13, Issue 9, Article Number 1497
Effect of Ni and Co nanoparticle-doped flux on microstructure of SAC305 solder matrix
September 01, 2022
Muhammad Nasir, A.S.M.A .Haseeb, Saif Wakeel, Muhammad Ali Khan, M. M. Quazi, Niaz Bahadur Khan, Arslan Ahmed, Manzoore Elahi M. Soudagar,
Journal of Materials Science: Materials in Electronics - Volume 33, Issue 25, Pages 20106-20120
Effect of Variation in the Mass Ratio on Vortex-Induced Vibration of a Circular Cylinder in Crossflow Direction at Reynold Number = 104: A Numerical Study Using RANS Model
August 17, 2022
Muhammad Usman Anwar, Maha M. A. Lashin, Niaz Bahadur Khan, Adnan Munir, Mohammed Jameel, Riaz Muhammad, Kamel Guedri, Ahmed M. Galal,
Journal of Marine Science and Engineering - Volume 10, Issue 8, Article Number 1126
Flexure and Shear Response of an impulsively loaded rigid-plastic beam by enhanced linear complementarity approach
June 14, 2022
Azam Khan, Moiz Tariq, Asad Ullah, Niaz Bahadur Khan, Mohammed Jameel,
Scientific Reports - Volume 12, Article Number 9893
A Low-Cost Device for Measurement of Exhaled Breath for the Detection of Obstructive Lung Disease
June 13, 2022
Adil Shahzad, Shafaq Mushtaq, Muhammad Asim Waris, Syed Omer Gilani, Maha Abdullah Alnuwaiser, Muhammad Jameel, Niaz Bahadur Khan,
Biosensors - Volume 12, Issue 6, Article Number 409
Numerical investigation of the effect of spanwise length and mesh density on flow around cylinder at Re = 3900 using LES model
April 08, 2022
Haider Ali, Niaz Bahadur Khan, Muhammad Jameel, Azam Khan, Muhammad Sajid, Adnan Munir, A. El-Sayed Ahmed, Khalid Abdulkhaliq M. Alharbi, Ahmed M. Galal,
PLoS One - Volume 17(4), Article Number e0266065
Numerical treatment of time dependent magnetohydrodynamic nanofluid flow of mass and heat transport subject to chemical reaction and heat source
March 01, 2022
Yun-XiangLi, S.R. Mishra, P.K.Pattnaik, S. Baag, Yong-MinLi, M.Ijaz Khan, Niaz Bahadur Khan, M Kbiri Alaoui, SamiUllah Khan,
Alexandria Engineering Journal - Volume 61, Issue 3, Pages 2484-2491
A modified Lemke Algorithm for dynamic rigid plastic response of skeletal structures
November 01, 2021
Azam Khan, Irshad Ahmad, Wajid Khan, Niaz Bahadur Khan, Muhammad Aslam,
Computers & Structures - Volume 256, Article Number 106638
Numerical Analysis of Heat Transfer and Pressure Drop in Helically Micro-Finned Tubes
April 24, 2021
Muhammad Ammar Ali, Muhammad Sajid, Emad Uddin, Niaz Bahadur Khan, Zaib Ali,
Processes - Volume 9, Article Number 754
Numerical and scale analysis of non-Newtonian fluid (Eyring-Powell) through pseudo-spectral collocation method (PSCM) towards a magnetized stretchable Riga surface
April 01, 2021
Yu-MingChu, Fayyaz Ahmad, M. Ijaz Khan, Mubbashar Nazeer, Farooq Hussain, Niaz Bahadur Khan, S. Kadry, Liquan Mei,
Alexandria Engineering Journal - Volume 60, Issue 2, Pages 2127-2137
Physical importance of entropy generation in fluid flow (Williamson) with nonlinear radiative heat flux
April 01, 2021
Niaz Bahadur Khan, M. Imran Khan, Waqar Azeem Khan, M. K. Nayak,
Indian Journal of Physics - Volume 95, Pages 717–724
Prediction of Compressive Strength of Rice Husk Ash Concrete through Different Machine Learning Processes
March 29, 2021
Ammar Iqtidar , Niaz Bahadur Khan, Sardar Kashif-ur-Rehman , Muhmmad Faisal Javed , Fahid Aslam, Rayed Alyousef , Hisham Alabduljabbar , Amir Mosavi ,
Crystals - Volume 11(4), Article Number 352
Dynamics of coupled reacted flow of Oldroyd-B material induced by isothermal/exothermal stretched disks with Joule heating, viscous dissipation and magnetic dipoles
February 01, 2021
M. Sadiq Hashmi, Nargis Khan, Sami Ullah Khan, M. Ijaz Khan, Niaz Bahadur Khan, Mubbashar Nazeer, Seifedine Kadry, Yu-Ming Chu,
Alexandria Engineering Journal - Volume 60, Issue 1, Pages 767-783
Non-magnetized mixed convective viscous flow submerged in titanium oxide and aluminum titanium oxide hybrid nanoparticles towards a surface of cylinder
January 01, 2021
Fazal Haq, M. Ijaz Khan, Yu-Ming Chu, Niaz Bahadur Khan, Seifedine Kadry,
International Communications in Heat and Mass Transfer - Volume 120, Article Number 105027
Transportation of Marangoni convection and irregular heat source in entropy optimized dissipative flow
January 01, 2021
M. Ijaz Khan, Sumaira Qayyum, Yu-Ming Chu, Niaz Bahadur Khan, Seifedine Kadry,
International Communications in Heat and Mass Transfer - Volume 120, January 2021, 105031
Thermally developed Cattaneo-Christov Maxwell nanofluid over bidirectional periodically accelerated surface with gyrotactic microorganisms and activation energy
December 01, 2020
Iftikhar Ahmad, Samaira Aziz, Nasir Ali, Sami Ullah Khan, M. Ijaz Khan, Iskander Tlili, Niaz Bahadur Khan,
Alexandria Engineering Journal - Volume 59, Issue 6, Pages 4865-4878
Numerical and scale analysis of Eyring-Powell nanofluid towards a magnetized stretched Riga surface with entropy generation and internal resistance
December 01, 2020
Mubbashar Nazeer, M. Ijaz Khan, M. Usman Rafiq, Niaz Bahadur Khan,
International Communications in Heat and Mass Transfer - Volume 119, Article Number 104968
Significance of activation energy, bio-convection and magnetohydrodynamic in flow of third grade fluid (non-Newtonian) towards stretched surface: A Buongiorno model analysis
November 01, 2020
Yu-Ming Chu, M. Ijaz Khan, Niaz Bahadur Khan, Seifedine Kadry, Sami Ullah Khan, Iskander Tlili, M.K. Nayak,
International Communications in Heat and Mass Transfer - Volume 118, November 2020, 104893
Binary chemical reaction with activation energy in rotating flow subject to nonlinear heat flux and heat source/sink
June 01, 2020
M. Ijaz Khan, Tehreem Nasi, T. Hayat, Niaz Bahadur Khan, A. Alsaedi,
Journal of Computational Design and Engineering - Volume 7, Issue 3, Pages 279–286
Magnetohydrodynamics (MHD) radiated nanomaterial viscous material flow by a curved surface with second order slip and entropy generation
June 01, 2020
Riaz Muhammad, M. Ijaz Khan, Niaz Bahadur Khan, Mohammed Jameel,
Computer Methods and Programs in Biomedicine - Volume 189, Article Number 105294
Fully developed Darcy-Forchheimer mixed convective flow over a curved surface with activation energy and entropy generation
May 01, 2020
Riaz Muhammad, M. Ijaz Khan, Mohammed Jameel, Niaz Bahadur Khan,
Computer Methods and Programs in Biomedicine - Volume 188, Article Number 105298
Analysis of entropy generation minimization (EGM) in flow of Ree-Eyring nanofluid between two coaxially rotating disks
February 08, 2020
Muhammad Ijaz Khan, Riaz Muhammad , Sumaira Qayyum, Niaz Bahadur Khan, M. Jameel,
Thermal Science - Pages 1-17
Modeling and computational analysis of hybrid class nanomaterials subject to entropy generation
October 01, 2019
M. Ijaz Khan, A. Alsaedi , T. Hayat , Niaz Bahadur Khan,
COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE - Volume 179, Article Number UNSP 104973
Newtonian heat and mass conditions impact in thermally radiated Maxwell nanofluid Darcy–Forchheimer flow with heat generation
August 05, 2019
Muhammad Waqas, M. Mudassar Gulzar, Waqar Azeem Khan, Muhammad Ijaz Khan, Niaz Bahadur Khan,
International Journal of Numerical Methods for Heat & Fluid Flow - Volume: 29, Issue: 8, Pages 2809-2821
Numerical simulation of flow with large eddy simulation at Re = 3900 A study on the accuracy of statistical quantities
June 24, 2019
Niaz B. Khan, Zainah B. Ibrahim, Mian Ashfaq Ali, Mohammed Jameel, Muhammad Ijaz Khan, Ahad Javanmardi, D.O. Oyejobi,
International Journal of Numerical Methods for Heat & Fluid Flow - -
On entropy generation effectiveness in flow of power law fluid with cubic autocatalytic chemical reaction
June 11, 2019
M. Faisal Javed, M. Waqas, Niaz Bahadur Khan, Riaz Muhammad, Muftooh Ur Rehman, M. Ijaz Khan, Sajjad Wali Khan, M. Tahir Hassan,
Applied Nanoscience - Volume 9, Issue 5, Pages 1205–1214
Transport of Jeffrey nanomaterial in cubic autocatalytic chemically nonlinear radiated flow with entropy generation
June 08, 2019
M. Faisal Javed, M. Waqas, M. Ijaz Khan, Niaz Bahadur Khan, Riaz Muhammad, Muftooh Ur Rehman, Sajjad Wali Khan, M. Tahir Hassan,
Applied Nanoscience - Volume 9, Issue 5, Pages 1-9
Physical aspects of Darcy-Forchheimer bidirectional flow in carbon nanotubes (SWCNTs and MWCNTs)
June 03, 2019
Muhammad Ijaz Khan, Madiha Rashid, Tasawar Hayat, Niaz B. Khan, Ahmed Alsaedi,
International Journal of Numerical Methods for Heat & Fluid Flow - Volume 29, Issue 6, Pages 2032-2056
Optimization of SWCNTs and MWCNTs (single and multi-wall carbon nanotubes) in peristaltic transport with thermal radiation in a non-uniform channel
January 01, 2019
M. Faisal Javed, Niaz Bahadur Khan, M. Imran Khan, Riaz Muhammad, Muftooh Ur Rehman, Sajjad Wali Khan, Tufail A.Khan, M. Tahir Hassan,
Journal of Molecular Liquids - Volume 273, Pages 383-391
Experimental and numerical study of flexural behavior of novel oil palm concrete filled steel tube exposed to elevated temperature
December 20, 2018
Muhammad Faisal Javed, Nor Hafizah Ramli Sulong , Shazim Ali Memon, Sardar Kashif-ur Rehman, Niaz Bahadur Khan,
Journal of Cleaner Production - Volume 205, Pages 95-114
Investigation of tendon dynamics effects on tension leg platform response in random seas
November 16, 2018
Damilola O Oyejobi, Mohammed Jameel, Nor Hafizah Ramli Sulong, Niaz Bahadur Khan,
Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment - online published on 16 November 2018
Flexural behaviour of steel hollow sections filled with concrete that contains OPBC as coarse aggregate
September 30, 2018
Muhammad Faisal Javed, N.H. Ramli Sulong, Shazim Ali Memon, Sardar Kashif-Ur Rehman, Niaz Bahadur Khan,
Journal of Constructional Steel Research - Volume 148, Pages 287-294
Seismic isolation retrofitting solution for an existing steel cable-stayed bridge
July 30, 2018
Ahad Javanmardi, Zainah Ibrahim, Khaled Ghaedi, Niaz Bahadur Khan, Hamed Benisi Ghadim,
PLoS ONE - NULL
VIV study of an elastically mounted cylinder having low mass-damping ratio using RANS model
June 01, 2018
Niaz Bahadur Khan, Zainah Ibrahim, M. Ijaz Khan, T. Hayat, Muhammad F. Javed,
International Journal of Heat and Mass Transfer - NULL
Axisymmetric flow of Casson fluid by a swirling cylinder
June 01, 2018
Muhammad Faisal Javed, Muhammad Imran Khan, Niaz Bahadur Khan, Riaz Muhammad, Muftooh Ur Rehman, Sajjad Wali Khan, Tufail A. Khan,
Results in Physics - NULL
Numerical investigation of vortexinduced vibration of an elastically mounted circular cylinder with Onedegree of freedom at high Reynolds number using different turbulent models
January 19, 2018
Niaz Bahadur Khan, Zainah Ibrahim,
Proceedings of the Institution of Mechanical Engineers Part M-Journal of Engineering for the Maritime Environment - Pages 1-11
Numerical investigation of flow around cylinder at Reynolds number = 3900 with large eddy simulation technique: Effect of spanwise length and mesh resolution
January 17, 2018
Niaz Bahadur Khan, Zainah Ibrahim, Ahmad Badarudin Bin Mohamad Badry, Mohammed Jameel, Muhammad Faisal Javed,
Proceedings of the Institution of Mechanical Engineers Part M-Journal of Engineering for the Maritime Environment - NULL
FE modelling of the flexural behaviour of square and rectangular steel tubes filled with normal and high strength concrete
October 01, 2017
Muhammad Faisal Javed, N.H. Ramli Sulong, Shazim Ali Memon, Sardar Kashif Ur Rehman, Niaz Bahadur Khan,
Thin-Walled Structures - Volume 119, Pages 470-481